Front Cross-Member: Service and Repair

Fig. 5 Front Suspension Assembly:

Refer to Fig. 5 when performing the following procedure.
1. Raise and support vehicle.
2. Remove front wheels.
3. Support engine using tool No. 921540000 or equivalent.
4. Remove center undercover.
5. Remove engine mount center member attaching nuts and bolts, then the center member.
6. Remove exhaust system.
7. Remove transverse link to crossmember attaching bolts.
8. Remove engine mount to crossmember attaching nut at crossmember connection.
9. Remove crossmember to body attaching bolt and the crossmember.
10. Reverse procedure to install. Refer to Fig. 5 for tightening specifications.