Disassembly and Reassembly

Distributor:

DIstributor Cap And Rotor:

DISASSEMBLY
1. Remove the distributor cap and rotor.
2. Remove the dust cover and seal ring.

Ground Harness:

3. Disconnect the ground harness.

Pulse Generator Screws:

4. Remove the screws securing the sensor assembly to the distributor housing.

Top View Of Distributor:

ASSEMBLY
1. Assemble in reverse order.

Air Gap:

2. Adjust reluctor air gap as follows:
a. Using a brass feeler gauge, measure the distance between the reluctor tips and each pole.
b. Move reluctor until all gaps are equal.

AIR GAP CLEARANCE
0.008 - 0.016 in (0.2 - 0.4 mm)