Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

Distributor Fasteners:





REMOVAL
1. Remove wires from distributor cap and remove cap.
2. Disconnect primary wire.
3. Remove distributor retaining bolt and remove distributor.
4. Remove O-ring.

INSTALLATION
1. Install O-ring onto distributor housing.
2. Lube distributor housing LIGHTLY with anti-seize compound.
3. Install distributor into cylinder and turn rotor to align.

NOTE: Distributor and cam are keyed. Distributor can only be inserted one way.

4. Install hold down screw and tighten slightly.
5. Install distributor cap and wires.
6. Connect electrical connector.
7. Adjust timing.