Transmission Speed Sensor: Service Precautions

Vehicle Speed Sensor 2

GENERAL PRECAUTIONS

1. Be careful not to drop or bump sensor as this may break built-in magnet.
2. Drive key is designed to separate from vehicle speed sensor 2. Be careful not to lose it or forget to install.
3. Vehicle speed sensor 2 is installed in part (which contains bearings, etc., finished to a high degree of accuracy). Do not allow foreign matter (filings, sand, etc.) to get into it.
4. When checking output of vehicle speed sensor 2 as a single unit, ensure test leads are connected to their correct terminals. Failure to do this may damage internal IC.
5. Discard vehicle speed sensor 2 after removal; replace with new one.