Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 1996 >> Impreza Sedan AWD F4-2.2L SOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Testing and Inspection



MEASURE TCM SIGNAL VOLTAGE INPUT





1. Check Harness Connector Between TCM And Diagnosis Switch.
1) Turn ignition switch OFF.
2) Disconnect connector from TCM.
3) Measure resistance of harness connector between TCM and diagnosis switch.
Connector & terminal / Specified resistance: (B53) No. 6 - (B58) No. 5 / 1 ohm, 0r less.





4) Measure resistance of harness connector between TCM and body to make suer that circuit does not short.
Connector & terminal / Specified resistance: (B53) No. 6 - Body / 1 M ohm, or more.





2. Check Input Signal For TCM.
1) Connect connector to TCM.
2) Turn ignition switch ON (with engine OFF)
3) Measure signal voltage for TCM while connecting and disconnecting the diagnosis terminal to diagnosis connector.
Connector & terminal / Specified voltage: (B53) No. 6 - Body / Less than 1 V (Connected) More than 6 V (Disconnected)





3. Check Diagnosis Switch Ground Line.
1) Measure resistance of harness terminal between diagnosis terminal and body.
Connector & terminal / Specified resistance: (B57) - Body / 1 ohm, or less
pro multis · About Operation CHARM