Removal

REMOVAL

CAUTION: Do not subject A.B.S. sensor harness to excessive tension. (A.B.S. equipped models.)

1) Separate front exhaust pipe and rear exhaust pipe.
2) Remove rear exhaust pipe and muffler.
3) Remove crossmember reinforcement lower.
(Sedan model only)
4) Remove rear differential.





5) Place transmission jack under rear crossmember.





6) Remove bolts securing crossmember to vehicle body, and remove crossmember.
7) Scribe an alignment mark on rear lateral link cam bolt and crossmember.
8) Remove four bolts securing front and rear lateral links to crossmember by loosening nuts.