Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 1996 >> Outback [Legacy] AWD F4-2.2L SOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Removal >> Front ABS Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front ABS Sensor

FRONT ABS SENSOR
1) Disconnect front ABS sensor connector located in engine compartment.





2) Remove bolts which secure sensor harness to strut.





3) Remove bolts which secure sensor harness to body.





4) Remove bolts which secure front ABS sensor to housing, and remove front ABS sensor.

CAUTION:
- Be careful not to damage pole piece located at tip of the sensor and teeth faces during removal.
- Do not pull sensor harness during removal.

5) Remove front disc brake caliper and disc rotor from housing after removing front tire.
6) Remove front drive shaft and housing and hub assembly.

Fig. 37 Tone Wheel & Hub Assembly:





7) Remove tone wheel while removing hub from housing and hub assembly.

CAUTION: Be careful not to damage teeth faces of tone wheel during removal.
pro multis · About Operation CHARM