Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 1996 >> Outback [Legacy] AWD F4-2.2L SOHC >> Repair and Diagnosis >> Cruise Control >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Description of On-Board Diagnostics >> Diagnostics Chart For Power Line >> Check Indicator and Circuit In Cruise Control Main Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Check Indicator and Circuit In Cruise Control Main Switch

CHECK INDICATOR AND CIRCUIT IN CRUISE CONTROL MAIN SWITCH

DIAGNOSIS:
- Bulb failure or open harness of the indicator circuit in the cruise control main switch.

TROUBLE SYMPTOM:




Wiring Diagram:




- Cruise control can be set, normally indicator does not come on. (When main switch is pressed.)




CHECK CRUISE CONTROL MAIN SWITCH.

1. Remove cruise control main switch.
2. Measure resistance between cruise control main switch terminals.

Terminals / Specified resistance:
No.1 - No.6 / Approx. 120 Ohm




CHECK CIRCUIT BETWEEN CRUISE CONTROL MODULE AND CRUISE CONTROL MAIN SWITCH INDICATOR LIGHT.
1. Turn the ignition switch to ON.
2. Turn cruise control main switch to ON.
3. Measure voltage between cruise control main switch connector and the body.

Connector & terminal / Specified voltage:
(i19) No.1 - Body / 10 V, or more

4. Turn the ignition switch and cruise control main switch to OFF.
5. Remove the connector from the cruise control main switch.
6. Measure resistance of ground circuit between the cruise control main switch connector and body.

Connector & terminal / Specified resistance:
(i19) No.6 - Body / 10 Ohm, max.
pro multis · About Operation CHARM