Removal and Installation
FUEL TANK PRESSURE SENSORA: REMOVAL AND INSTALLATION
1) Disconnect battery ground cable.
2) Remove right side rear quarter trim.
(1) Release hanger hook which holds rear quarter side seat back on body, and move side seat back to forward.
(2) Remove strut mount cover.
(3) Move upper side rear quarter trim.
(4) Remove right side floor cushion.
(5) Remove right side cage room eyelet.
(6) Remove right side rear panel trim.
(7) Remove clips which install rear quarter trim on body, and remove it from body
(8) Disconnect connectors from rear accessory power supply socket.
3) Disconnect connector from fuel tank pressure sensor.
4) Remove bolts which install fuel tank pressure sensor bracket on body.
5) Disconnect hose from fuel tank pressure sensor.
6) Remove fuel tank pressure sensor from bracket.
7) Installation is in the reverse order of removal.
Tightening torque: 7.35 ± 1.96 N.m (0.75 ± 0.20 kg-m, 5.4 ± 1.4 ft-lb)