Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Installation
1. Install
knock sensor to cylinder block.
Tightening torque:
23.5 ± 2.9 Nm (2.4 ± 0.3 kg.m, 17.4 ± 2.2 ft.lb) NOTE: The
knock sensor cord which is extracted from the sensor must be positioned at a
450° angle against the rear side of the engine.
2.
Connect
knock sensor connector and hold knock sensor harness with band.
3.
Install air intake chamber.
4.
Connect battery ground cable to battery ground terminal.
