Clutch Fluid: Service and Repair

1. Remove release lever return spring from lever (models without hill holder only).
2. Adjust spherical nut so that the play is within the specified value at the lever end (center of spherical nut).

CAUTION: Take care not to twist the cable during adjustment.

Play: 3 - 4 mm (0.12 - 0.16 inch)
Full Stroke: 24 - 26 mm (0.94 - 1.02 inch)





3. Upon completion of adjustment, securely lock spherical nut with lock nut.
Install return spring on lever (models without hill holder only).

NOTE: Hook the long hook side of the return spring with the lever (models without hill holder only).





4. Depress clutch pedal to assure there is no abnormality in the clutch system.