Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 1999 >> Legacy Outback AWD F4-2.5L DOHC >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Combination Switch >> Service and Repair >> Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Installation

COMBINATION SWITCH (WITHOUT AIRBAG MODEL)

NOTE: For the removal procedure of combination switch, refer to procedure for removal of combination switch on airbag equipped model.

1. Remove steering wheel.




2. Remove screws which secure upper column cover to lower column cover.
3. Remove screws which secure knee protector and remove knee protector.

CAUTION: When installing knee protector, ensure that harness is not caught by adjacent parts.




4. Disconnect connector from body harness and undo holddown band.
5. Remove screws which secure switch and remove switch.
6. Installation is in the reverse order of removal.

CAUTION:
During installation (with key interlock):
- When routing combination switch harness around steering system; do not place it over key interlock release knob.
- After installing lower column cover, ensure that key interlock release knob is accessible.
pro multis · About Operation CHARM