Fuel Pressure Sensor/Switch: Service and Repair

1. Disconnect battery ground cable.





2. Remove canister.





3. Remove bolt which installs pressure control solenoid valve holding bracket on body.





4. Disconnect connector from pressure control solenoid valve.
5. Disconnect two evaporation hoses from pressure control solenoid valve.





6. Remove pressure control solenoid valve with bracket.





7. Remove pressure control solenoid valve from bracket.





8. Disconnect vacuum hose from pressure control solenoid valve.





9. Installation is in the reverse order of removal.

Tightening torque:
24.5 ± 5 Nm (2.5 ± 0.5 kg.m, 18.1 ± 3.6 ft.lb)