Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Installation
1.
Install
knock sensor to cylinder block.
Tightening torque:
23.5 ± 2.9 N.m (2.4 ± 0.3 kg.m, 17.4 ± 2.2 ft.lb) NOTE: The extraction area of the
knock sensor cord must be positioned at a
45° angle relative to the engine rear.
2.
Connect
knock sensor connector.
3.
Install air cleaner case.
4.
Connect battery ground cable.
