Replacement

REPLACEMENT
1. Remove intake duct and intake chamber.
2. Remove washer tank and put it aside.
3. Disconnect spark plug cord.




4. Remove spark plug with a plug-wrench.
5. Set new spark plug.

Recommended spark plug:
CHAMPION: RC10YC4
NGK: BKR6E-11
CHAMPION: RC8YC4
NIPPONDENSO: K20PR-U11

Spark plug gap: 1.0 - 1.1 mm (0.039 - 0.043 in)

6. Tighten spark plug lightly with hand, and then secure with a plug-wrench to the specified torque.

Tightening torque: 21 ± 3 N.m (2.1 ± 0.3 kg.m, 15 ± 2 ft.lb)

CAUTION: Be sure to place the gasket between the cylinder head and spark plug.

NOTE: If torque wrench is not available, tighten spark plug until gasket contacts cylinder head; then tighten further 1/4 to 1/2 turns.