Ignition Switch: Description and Operation
DESCRIPTION1. Ignition Switch
- The ignition switches on the MT models have a safety mechanism that prevents inadvertent locking of the steering wheel during driving. The driver cannot turn the ignition key from "ACC" to "LOCK" unless the key is pushed inward at the "ACC" position (arrow 1 in the drawing below).
- The ignition switches on the IAT models have a key interlock mechanism to avoid locking of the steering wheel during driving. The ignition key can be turned to the "LOCK" position only when the select lever is in the P position.
NOTE: Should the key be impossible to turn to "LOCK" when the select lever is in the P position due to failure of the key interlock mechanism, the interlocking can be canceled by operating the release lever located on the underside of the steering column.
2. KEY REMINDER CHIME
The key reminder chime sounds when the driver's door opens and the ignition key is in the "LOCK" or "ACC" positions. The chime stops when the key is removed from the ignition switch.