Fuel Tank Pressure Sensor: Service and Repair

REMOVAL

1. Remove the fuel tank.




2. Remove the protector cover.




3. Disconnect the connector from fuel pressure sensor, then remove the fixing nut.




4. Release the clips which hold fuel pipes onto fuel tank.
5. Remove the clip, and disconnect pressure hose from fuel tank.




6. Disconnect the pressure hose from fuel tank pressure sensor.

INSTALLATION
Install in the reverse order of removal.

Tightening Torque: 7.4 Nm (0.75 kgf-m, 5.4 ft. lbs)

INSPECTION
Make sure the hoses are not cracked or loose.