Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Manifold Pressure/Vacuum Sensor: Service and Repair

REMOVAL

1. Disconnect battery ground cable.

2. Disconnect spark plug cord from ignition coil and ignitor assembly.

3. Disconnect connector from intake air temperature and pressure sensor.

4. Remove intake air temperature and pressure sensor.

INSTALLATION
Install in the reverse order of removal.

Tightening torque: 3.4 Nm (0.35 kgf-m, 2.5 ft-lb)

NOTE: Replace O-ring with a new one.