Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Disassembly and Assembly
DISASSEMBLY 1.
Remove snap ring.
2.
Remove ball bearing.
ASSEMBLY 1.
Set the ST to inner race of bearing and install to drive shaft.
ST 39817700 INSTALLER
CAUTION: Do not apply pressure in excess of
10 kN (1 ton, 1.1 US ton, 1.0 Imp ton) 2.
Install snap ring on transfer drive shaft.
3.
Inspect clearance between snap ring and inner race of ball bearing.
