Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gear Sensor/Switch: Service and Repair

Switches and Harness
REMOVAL
1. Disconnect battery ground cable.
2. Remove air intake duct and cleaner case.





3. Disconnect connector back-up light switch and neutral position switch.
4. Lift-up the vehicle.





5. Remove back-up light switch and neutral position switch with harness.

INSTALLATION





1. Install back-up light switch and neutral position switch with harness.
Tightening torque: 24.5 Nm (2.5 kgf-cm, 18.1 ft. lbs.)
2. Connect connector of back-up light switch and neutral position switch.
3. Install air cleaner case.
4. Connect battery ground cable.