Throttle Body: Service and Repair

REMOVAL




1. Disconnect battery ground cable.
2. Remove air cleaner case.
3. Disconnect accelerator cable (A).




4. Disconnect cruise control cable (B). (With cruise control model)
5. Disconnect connectors from idle air control solenoid valve, throttle position sensor and pressure sensor.




6. Disconnect air by-pass hose from throttle body.
7. Disconnect engine coolant hoses (A) from throttle body.




8. Remove bolts (B) which install throttle body to intake manifold.

INSTALLATION

1. Install in the reverse order of removal.
2. Install accelerator cable.

NOTE: Always use a new gasket.

Tightening torque:
Throttle body; 22 N.m (2.2 kgf-m, 15.9 ft-lb)