A/T Fluid Replacement

ATF

REPLACEMENT
1) Lift up the vehicle.





2) Drain the ATF completely.

CAUTION: Directly after the engine has been running, the ATF is hot. Be careful not to burn yourself.

NOTE: Tighten the ATF drain plug after draining the ATF.

Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)

3) Lower the vehicle.
4) Pour ATF into the oil charge pipe.
Recommended fluid: Dexron III type Automatic transmission fluid
Capacity: Fill the same amount of fluid drained from drain plug hole.
Capacity when transmission is overhauled: 9.3 - 9.6 liters (9.8 - 10.1 US quarts 8.2 - 8.4 Imp quarts)
5) Check the level and leaks of ATF.