Disassembly and Assembly

Wiper Blade

DISASSEMBLY

METAL TYPE




Pull on side (A) of the wiper rubber stopper and remove the rubber from the blade assembly.

RESIN TYPE




Pull the wiper rubber top slightly from the stopper and pull out fully.

ASSEMBLY

METAL TYPE




1. Insert the wiper rubber onto the blade so that the stopper is in the position shown.




2. Make sure the wiper rubber is securely fastened to the pull stopper (A).




RESIN TYPE




1. Insert the wiper rubber through the claw (B).




2. Insert the wiper rubber top until it protrudes about 20 mm (0.79 in) from the stopper (D).




3. Insert the wiper rubber into the claw (A).