Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2004 >> Outback F4-2.5L SOHC >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Throttle Cable/Linkage >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Cable/Linkage: Service and Repair

Accelerator Control Cable

REMOVAL

1. Remove accelerator pedal.
2. Separate accelerator cable and accelerator pedal

INSTALLATION

1. Install in the reverse order of removal.




2. Apply grease at the accelerator cable end on engine room side.
Part No. 004404002 (Slico lube G-30M)

NOTE:
- If cable clamp is damaged, replace it with a new one.
- Never fail to cover outer cable end with boot.
- Be careful not to kink accelerator cable.
- Do not apply grease except for special area.

3. Adjustment after pedal installation.

INSPECTION

1. Make sure the inner cable is not twisted or frayed.
2. Make sure the outer cable is not cracked.
pro multis · About Operation CHARM