Floor Mat

FLOOR MAT

REMOVAL

1. Remove front seats.
2. Remove rear seat cushion.
3. Remove console box.
4. Remove front pillar lower trim, side sill rear upper cover and center pillar lower trim.
5. Remove clips from floor mat.

NOTE: When pulling out edge, do not pull mat alone; pull mat together with edge. Ply off two steel clips on side sill front cover and one on side sill rear cover using screwdriver.

6. Remove mat hook.
7. Remove mat from toe board area.
8. Remove mat from rear heater duct.
9. Roll mat, and then take it out of opened rear door.






INSTALLATION

Install in the reverse order of removal.

NOTE:
- Secure mat firmly with hook and Velcro tape.
- Insert mat edge firmly into the groove of side sill cover.