Throttle Cable/Linkage: Service and Repair

Accelerator Control Cable

REMOVAL

1. Remove accelerator pedal.
2. Separate accelerator cable and accelerator pedal.

INSTALLATION

1. Install in the reverse order of removal




2. Apply grease to engine side accelerator cable end

Grease: Part No. 004404002 Slicolube G-30M

CAUTION:
- If cable clamp is damaged, replace it with a new one.
- Never fail to cover outer cable end with boot.
- Be careful not to kink accelerator cable.
- Do not apply grease to the throttle cable on the engine side.

3. Adjustment after pedal installation.

INSPECTION

1. Make sure the inner cable is not twisted or frayed.
2. Make sure the outer cable is not cracked.