Glove Compartment: Service and Repair

GLOVE BOX

REMOVAL

1. Disconnect the ground cable from battery.
2. Remove the console box.
3. Remove the console front panel.






NOTE:
- For AT model, remove the ring indicator.
- For MT model, remove the shift knob.

4. Remove the console side garnish.






5. Remove the front inside scuff plate (A) and front pillar lower trim (B).






6. Remove the clip, and remove the glove box lower cover.






7. Remove the console side panel.






8. Remove the instrument panel side cover, and remove the clip.






9. Remove the screw, and remove the glove box.






INSTALLATION

Install in the reverse order of removal.