Upper Inner Trim

UPPER INNER TRIM

Inner Trim (Sedan Model):

Inner Trim (Wagon Model):

REMOVAL

1. From the top side of trim, remove the metal clip using flat tip driver.






CAUTION: When metal clip is removed or damaged, replace the both of trim and metal clip with new ones.

2. Remove the front pillar upper trim.






3. Remove the front inside scuff plate, rear inside scuff plate and center pillar lower trim.
4. Remove the cap on the upper side of pillar trim, and remove the bolt inside.






5. Remove the center pillar upper trim.






6. Remove the seat belt lower anchor bolt at center pillar lower port. (Driver's seat)
7. Refer to the removal procedure of "Front Seat Belt". (Passenger's seat).

INSTALLATION

Install in the reverse order of removal.