Crank Pulley

REMOVAL





1. Remove the crank pulley cover.





2. Remove the crank pulley bolt. To lock the crankshaft, use ST.
ST 499977100 CRANK PULLEY WRENCH
3. Remove the crank pulley.

INSTALLATION
1. Install the crank pulley.
2. Install the crank pulley bolt. To lock the crankshaft, use ST.
ST 499977100 CRANK PULLEY WRENCH
a Clean the crank pulley thread using compressed air.
b Apply engine oil to the crank pulley bolt seat and thread.





c Tighten the crank pulley bolts.
3. Install the crank pulley cover.





NOTE: Attach the O-ring to crank pulley cover.

INSPECTION
1. Check the crank pulley cover for oil and air leakage.
2. Check crank pulley for looseness.