Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2005 >> Outback F6-3.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Disassembly and Assembly >> Front Chain Cover
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Chain Cover

REMOVAL
1. Remove the crank pulley.





2. Remove the front chain cover.

NOTE: Chain cover installation bolt has three different sizes. To prevent the confusion in installation, keep these bolts on container individually.

INSTALLATION
1. Remove the used liquid gasket from mating surface, and degrease it.





2. Apply liquid gasket to the matching surface of front chain cover.





3. Install the front chain cover. Temporarily tighten the bolts.

CAUTION: Do not install the bolts in wrong place.





4. Tighten the bolts in the numerical order as shown in the figure.
Tightening torque: 6.6 Nm (0.67 kgf-m, 4.8 ft. lbs.)
5. Install the crank pulley.

INSPECTION
Check the cover surface for scratch and damage. Check for oil leakage on cover mating surface and installation part of crank pulley.

pro multis · About Operation CHARM