Preparation For Overhaul

REMOVAL
1. Remove the engine assembly.





2. Set the engine on ST1.
ST 18232AA000 ENGINE STAND
3. Before servicing overhaul, remove the sensor, pipe and hose that installed to engine.
a Remove the intake manifold.
b Remove the generator.
c Remove the A/C compressor.
d Disconnect the water pipe and hose.
e Disconnect the engine harness.
f Remove the spark plug.
g Remove the camshaft position sensor.
h Remove the crankshaft position sensor.
i Remove the knock sensor.
j. Remove the engine coolant temperature sensor.
11. Remove the oil pressure switch.
12. Remove the oil filter.
13. Remove the oil cooler.