Center Mounted Brake Lamp: Testing and Inspection

High-mounted Stop Light

INSPECTION

1. SEDAN MODEL
1. Visually check the bulb for blow out.
2. Check the bulb specification.
3. If NG, replace the bulb with a new one.

2. WAGON MODEL
1. Install the high-mounted stop light to test if it illuminates normally.
2. If the high-mounted stop light does not illuminate, replace it with a new one.

NOTE: Since LED (Light Emitting Diode) is used for the high-mounted stop light of wagon model, replace the high-mounted stop light assembly when the LED is powered off.