Keyless Entry: Service and Repair

Remote Openers

FRONT HOOD OPENER

REMOVAL

1. Remove the hood lock assembly.
2. Remove the release cable from hood lock.




3. Remove the bolt, and then detach the opener lever.

INSTALLATION
Install in the reverse order of removal.

FUEL FLAP OPENER

REMOVAL

1. Remove the rear seat.
2. Remove the center pillar lower trim and side sill cover. Remove the rear pillar lower trim. Remove the floor mat.
3. Remove the rear quarter trim RH.
4. Remove the bolt, and then detach the opener pull handle (B).




5. Remove the cable (A) from opener pull handle (B).




6. Rotate the fuel lock inside the quarter panel to the left and remove.

INSTALLATION
Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)