Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2006 >> Forester F4-2.5L SOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Pinout Values and Diagnostic Parameters >> Control Module Pinout Values - With VDC
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module Pinout Values - With VDC

Control Module I/O Signal

ELECTRICAL SPECIFICATION





NOTE:
^ Terminal numbers in the VDCCM connector are as shown in the figure.
^ When the connector is removed from VDCCM, the connector switch closes the circuit between terminals No. 53 and 54. Then, ABS warning light and brake warning light (EBD warning light) illuminates.








WIRING DIAGRAM





MEASUREMENT
Measure the input and output signal voltages.

NOTE: Measure while the VDCCM connector cover is removed.

1. WAVEFORM








NOTE: For output waveform of ABS wheel speed sensor, refer to the "ABS DIAGNOSTICS".
pro multis · About Operation CHARM