Turbine Speed Sensor 1

Turbine Speed Sensor 1

REMOVAL
1. Lift-up the vehicle.
2. Remove the intercooler. (Turbo model)
3. Remove the air intake chamber. (Non-turbo model)





4. Disconnect the turbine speed sensor 1 connector.
5. Remove the turbine speed sensor 1.

INSTALLATION
1. Install the turbine speed sensor 1.
Tightening torque: 7 Nm (0.7 kgf-cm, 5.2 ft. lbs.)





2. Connect the turbine speed sensor 1 connector.
3. Install the intercooler. (Turbo model)
4. Install the air intake chamber. (Non-turbo model)