Front Door Window Glass: Service and Repair

Front Door Glass

REMOVAL
1. Remove the front door trim.
2. Remove the sealing cover.




3. Operate the power window switch to move the glass to the position shown in the figure, and then remove the two bolts through service holes.
4. Tilt the door glass forward, then remove the door glass from the glass run rubber.




5. Remove the door glass.

CAUTION:
- Since the gear may be disengaged, do not turn regulator in the closing direction after removing glass.
- Avoid impact and damage to the glass.




6. Remove the bolt (A), and then remove the door sash (B).

INSTALLATION
Install in the reverse order of removal.

CAUTION: Make sure that the glass stay is placed securely in sash.

Tightening torque:
T1: 4.9 Nm (0.5 kgf-m, 3.6 ft-lb)
T2: 7.4 Nm(0.75 kgf-m, 5.5 ft-lb)