Brake Pedal Assy: Service and Repair

REMOVAL
MT MODEL
1. Remove the steering shaft.
2. Disconnect the connectors (stop light switch) from pedal bracket.
3. Remove the clevis pin which secures lever to push rod.
4. Remove the nuts which secure clutch master cylinder.





5. Remove the bolts and nuts which secure pedal bracket.

AT MODEL
1. Remove the steering shaft.
2. Disconnect the connectors (stop light switch) from pedal bracket.
3. Remove the clevis pin which secures lever to push rod.





4. Remove the bolts and nuts which secure pedal bracket.

INSTALLATION
1. Install in the reverse order of removal.

CAUTION: Always use new clevis pins.

2. Inspect the brake pedal after installation.