Keyless Entry: Testing and Inspection
Keyless Entry SystemINSPECTION
1. SYMPTOM CHART
Symptom Chart (Part 1):
Symptom Chart (Part 2):
2. CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION
Step 1-4:
CAUTION: Be sure to reset the keyless transmitter of the other vehicle that was registered to the inspection target vehicle, and the vehicle for which the keyless transmitter was registered for inspection, to the condition before performing the inspection. (Register the keyless transmitter again.)
3. CHECK BUZZER CHIRP SETTING
Step 1-2:
4. CHECK POWER SUPPLY AND GROUND CIRCUIT
Step 1-2:
5. CHECK IGNITION SWITCH CIRCUIT
Step 1:
6. CHECK DOOR SWITCH
Step 1-4:
7. CHECK KEY WARNING SWITCH
Step 1-5:
8. CHECK ROOM LIGHT OPERATION
Step 1-2:
9. CHECK OUTPUT SIGNAL OF THE BODY INTEGRATED UNIT
Step 1-3:
10. CHECK HORN OPERATION
Step 1-2:
11. CHECK HAZARD LIGHT OPERATION
Step 1-2:
12. CHECK KEYLESS BUZZER
Step 1-4:
