Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2008 >> Outback F4-2.5L DOHC Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Gear Sensor/Switch >> Service and Repair >> Back-Up Light Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Back-Up Light Switch

Back-up Light Switch

REMOVAL
1) Remove the manual transmission assembly from the vehicle.
2) Disconnect the back-up light switch connector.





3) Disconnect the back-up light switch.





INSTALLATION
1) Install the back-up light switch.

NOTE: Use a new gasket.





2) Connect the back-up light switch connector.





3) Install the manual transmission assembly to the vehicle.

INSPECTION
1) Disconnect the ground cable from the battery.
2) Remove the intercooler.
3) Disconnect the transmission harness and chassis harness.





4) Measure the resistance between the back-up light switch terminals. If it is not within the specification, replace the back-up light switch.







pro multis · About Operation CHARM