Torque Converter Turbine Speed Sensor

1Turbine Speed Sensor 1

REMOVAL
1) Remove the intercooler. (Turbo model)
2) Remove the air intake chamber. (Non-turbo model)
3) Lift up the vehicle.
4) Disconnect the turbine speed sensor 1 connector.





5) Remove the turbine speed sensor 1.

INSTALLATION
1) Install the turbine speed sensor 1.
Tightening torque: 7 N-m (0.7 kgf-m, 5.2 ft-lb)
2) Connect the turbine speed sensor 1 connector.





3) Lower the vehicle.
4) Install the intercooler. (Turbo model)
5) Install the air intake chamber. (Non-turbo model)