Rearview Mirror

REARVIEW MIRROR

Mirror:

REMOVAL

NOTE: Never reuse the spring. Prepare a new spring before removal.

1. Turn the mirror base 90° clockwise or counterclockwise to remove it.






2. Remove the spring from the mirror base.






CAUTION: Be careful not to damage the mirror surface.

3. When the mirror base is damaged, use something like piano wire or a spatula to remove.

CAUTION: Be careful not to damage the windshield glass.

INSTALLATION

Install in the reverse order of removal.

NOTE: If the mirror base is removed, install it in the following procedure.

1. Clean the old adhesive completely.
2. Align the mirror base with the mark on the windshield glass to install it.
3. Make sure the mirror base is securely attached and then install the spring to it.

Adhesive REPAIR KIT IN MR (Part No. 65029FC000) or equivalent