Removal and Replacement
Washer Tank and MotorREMOVAL
1. Open the front hood.
2. Disconnect the ground cable from the battery.
3. Remove the front bumper.
4. Remove the duct clip.
5. Disconnect the connector.
6. Remove the screws and detach the cover.
7. Disconnect the hose.
8. Remove the bolts and nuts and remove the washer tank.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 6.0 N.m (0.61 kgf.m, 4.4 ft.lb)