Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2009 >> Forester F4-2.5L SOHC >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Alignment Sensor >> Service and Repair >> Rear Height Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Height Sensor

Rear Height Sensor

REMOVAL

CAUTION: Always remove the vehicle height sensor before removing any parts related to the suspension.

1. Disconnect the negative terminal of the battery.
2. Lift up the vehicle and remove the left rear wheel.
3. Disconnect the sensor connector, remove the nut and remove the rear vehicle height sensor.






CAUTION: Do not disassemble the sensor and lever.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf.m, 5.5 ft.lb)

NOTE: Perform reinitialization if the rear vehicle height sensor was removed.
pro multis · About Operation CHARM