Installation

INSTALLATION

Install in the reverse order of removal.

NOTE:
Tighten the small type crossmember support plate together with stabilizer bracket. After installing the stabilizer bracket to the crossmember, tighten the crossmember support plate together.

Tightening torque:
Crossmember support plate:
60 N-m (6.1 kgf-m, 44.3 ft-lb)

Crossmember support plate (Tightened together with the stabilizer bracket):
25 N-m (2.5 kgf-m, 18.4 ft-lb)

Jack-up plate:
60 N-m (6.1 kgf-m, 44.3 ft-lb)