License Plate Bulb: Service and Repair
License Plate LightREMOVAL
1. SEDAN MODEL
1. Disconnect the ground cable from the battery.
2. Remove the trunk lid trim.
3. Turn and remove the bulb socket (A).
4. Remove the bulb.
2. WAGON MODEL
1. Disconnect the ground cable from the battery.
2. Remove the license plate light mounting screw (A) and then remove the lens (B).
3. Remove the bulb.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 1.5 N.m (0.15 kgf.m, 1.1 ft.lb)