Removal

Tire Pressure Monitoring System
REMOVAL
TRANSMITTER (SNAP IN TYPE)
1. Remove the wheels from the vehicle.
2. Remove the tires from wheels.

CAUTION: Use a tire changer when removing the tire from the wheel.

3. Loosen the screw to remove the transmitter from the valve.

NOTE: Replace the valve and screw with a new part when reusing transmitter.





4. Remove the valve stems from the wheel.

TIRE PRESSURE MONITORING CONTROL MODULE
1. Remove the driver's seat.
2. Turn up the floor mat in the driver's seat area.
3. Remove the connector to remove tire pressure monitoring control module.