Radiator Sub Fan

Radiator Sub Fan and Fan Motor





REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.





3) Lift up the vehicle.
4) Remove the under cover.
5) Remove the connector (B) of sub fan motor assembly.





6) Remove the heat shield cover. (AT model)





7) Remove the ATF hose from the clip of the radiator sub fan & fan motor assembly. (AT model)
8) Lower the vehicle.
9) Remove the air intake duct.
10) Drain approximately 2 l of coolant.
11) Disconnect the radiator inlet hose from the radiator.





12) Remove the bolts which hold the radiator sub fan shroud to the radiator.





13) Remove the radiator sub fan and fan motor from vehicle.

INSTALLATION

CAUTION:
Confirm that the radiator hose is securely connected.

Install in the reverse order of removal.








DISASSEMBLY
1) Remove the clip which holds the sub fan motor assembly connector onto the radiator sub fan shroud.
2) Remove the sub fan motor assembly from the radiator sub fan shroud.





ASSEMBLY
Assemble in the reverse order of disassembly.





INSPECTION
Check that the radiator sub fan, radiator sub fan shroud and sub fan motor assembly do not have deformation, cracks or damage.