Clearing Diagnostic Trouble Codes

Clear Memory Mode

OPERATION
1) Move the select lever to "P" range.
2) Using the Subaru Select Monitor, select (Each System Check in the [Main Menu].
3) On the [Each System Check Menu] screen, select (Transmission Control System).
4) After transmission type information is displayed, select [OK].
5) On the [Transmission Diagnosis], select (Clear Memory).
6) When "Done. Turn ignition switch OFF" is displayed, select [OK].
7) Turn the ignition switch to OFF. When turning the ignition switch to ON again, wait for 10 seconds or more.
8) Turn the Subaru Select Monitor OFF.

NOTE:
^ If (Clear Memories 21 is executed, DTCs and learned control memory are cleared.
^ If (Clear Memories 21 is executed, perform learning.