Antitheft Motion Sensor: Service and Repair

Impact Sensor

REMOVAL

1. Remove the key from ignition switch.
2. Close all the doors and rear gate.
3. Press the UNLOCK button of the keyless transmitter.
4. Disconnect the ground cable from battery.
5. Remove the impact sensor.
6. Change the impact sensor setting using the Subaru Select Monitor.

INSTALLATION

1. Remove the key from ignition switch.
2. Close all the doors and rear gate.
3. Press the UNLOCK button of the keyless transmitter.
4. Disconnect the ground cable from battery.
5. Install the impact sensor.
6. Change the impact sensor setting using the Subaru Select Monitor.