Function Check

Function Check

OPERATION

NOTE: In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Integ. unit mode}.
3. On {{Integ. unit mode failure diag}} display, select {Function Check}.
4. Select an item to be operated on {{Function check}} display, and press the [OK] button.
5. Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.

NOTE:
- If not equipped (based on area or condition), process will not go on.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".